And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.263
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.350
And
I accept adding "cowsay" to Additional Software
3.668
And
Additional Software is correctly configured for package "cowsay"
0.563
And
I shutdown Tails and wait for the computer to power off
7.778
And
I start Tails from USB drive "__internal" with network unplugged
34.834
And
I enable persistence
5.450
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
9.217
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.338
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.012
And
available upgrades have been checked
2.174
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.496
And
I can open the Additional Software configuration window from the notification
2.555
And
I shutdown Tails and wait for the computer to power off
18.478
And
I start Tails from USB drive "__internal" with network unplugged
34.492
And
I enable persistence
5.541
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
8.786
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.357
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058