And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.065
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.705
And
I accept adding "cowsay" to Additional Software
4.959
And
Additional Software is correctly configured for package "cowsay"
0.700
And
I shutdown Tails and wait for the computer to power off
8.295
And
I start Tails from USB drive "__internal" with network unplugged
36.863
And
I enable persistence
7.198
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.013
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.447
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.019
And
available upgrades have been checked
2.233
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.513
And
I can open the Additional Software configuration window from the notification
2.611
And
I shutdown Tails and wait for the computer to power off
13.269
And
I start Tails from USB drive "__internal" with network unplugged
37.237
And
I enable persistence
7.164
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.582
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.316
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071