And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:43.198
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.375
And
I accept adding "cowsay" to Additional Software
3.657
And
Additional Software is correctly configured for package "cowsay"
0.622
And
I shutdown Tails and wait for the computer to power off
7.837
And
I start Tails from USB drive "__internal" with network unplugged
34.609
And
I enable persistence
5.527
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.283
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.350
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.016
And
available upgrades have been checked
2.166
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.526
And
I can open the Additional Software configuration window from the notification
2.549
And
I shutdown Tails and wait for the computer to power off
13.161
And
I start Tails from USB drive "__internal" with network unplugged
34.370
And
I enable persistence
6.522
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.499
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.331
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.128
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057