And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.647
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.605
And
I accept adding "cowsay" to Additional Software
3.655
And
Additional Software is correctly configured for package "cowsay"
0.633
And
I shutdown Tails and wait for the computer to power off
8.139
And
I start Tails from USB drive "__internal" with network unplugged
36.892
And
I enable persistence
6.410
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.056
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.361
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.017
And
available upgrades have been checked
2.155
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.536
And
I can open the Additional Software configuration window from the notification
2.551
And
I shutdown Tails and wait for the computer to power off
22.666
And
I start Tails from USB drive "__internal" with network unplugged
37.431
And
I enable persistence
6.375
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.895
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.328
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.142
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062