And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.246
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.697
And
I accept adding "cowsay" to Additional Software
4.886
And
Additional Software is correctly configured for package "cowsay"
0.620
And
I shutdown Tails and wait for the computer to power off
4.586
And
I start Tails from USB drive "__internal" with network unplugged
37.953
And
I enable persistence
6.904
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
9.326
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.373
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.017
And
available upgrades have been checked
1.127
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.581
And
I can open the Additional Software configuration window from the notification
2.590
And
I shutdown Tails and wait for the computer to power off
22.971
And
I start Tails from USB drive "__internal" with network unplugged
37.013
And
I enable persistence
5.526
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.883
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.415
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056