And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:52.403
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.182
And
I accept adding "cowsay" to Additional Software
4.911
And
Additional Software is correctly configured for package "cowsay"
0.947
And
I shutdown Tails and wait for the computer to power off
4.410
And
I start Tails from USB drive "__internal" with network unplugged
39.796
And
I enable persistence
7.102
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.691
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.744
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.016
And
available upgrades have been checked
3.337
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.537
And
I can open the Additional Software configuration window from the notification
2.614
And
I shutdown Tails and wait for the computer to power off
14.080
And
I start Tails from USB drive "__internal" with network unplugged
38.568
And
I enable persistence
6.906
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
11.799
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.677
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.214
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068