And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.420
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.198
And
I accept adding "cowsay" to Additional Software
3.687
And
Additional Software is correctly configured for package "cowsay"
0.552
And
I shutdown Tails and wait for the computer to power off
7.865
And
I start Tails from USB drive "__internal" with network unplugged
35.952
And
I enable persistence
5.339
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.162
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.280
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.016
And
available upgrades have been checked
0.067
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.826
And
I can open the Additional Software configuration window from the notification
2.489
And
I shutdown Tails and wait for the computer to power off
17.091
And
I start Tails from USB drive "__internal" with network unplugged
34.618
And
I enable persistence
5.773
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.485
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.259
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.142
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074