And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:32.561
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.295
And
I accept adding "cowsay" to Additional Software
5.423
And
Additional Software is correctly configured for package "cowsay"
0.776
And
I shutdown Tails and wait for the computer to power off
3.083
And
I start Tails from USB drive "__internal" with network unplugged
43.303
And
I enable persistence
8.996
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
12.233
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.347
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.076
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.982
And
I can open the Additional Software configuration window from the notification
2.762
And
I shutdown Tails and wait for the computer to power off
18.483
And
I start Tails from USB drive "__internal" with network unplugged
43.395
And
I enable persistence
7.673
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
12.367
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.351
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.210
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073