And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:48.415
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.792
And
I accept adding "cowsay" to Additional Software
4.971
And
Additional Software is correctly configured for package "cowsay"
0.740
And
I shutdown Tails and wait for the computer to power off
8.170
And
I start Tails from USB drive "__internal" with network unplugged
36.928
And
I enable persistence
6.438
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.991
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.428
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.019
And
available upgrades have been checked
1.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.059
And
I can open the Additional Software configuration window from the notification
2.634
And
I shutdown Tails and wait for the computer to power off
17.842
And
I start Tails from USB drive "__internal" with network unplugged
38.728
And
I enable persistence
6.980
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
12.204
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.861
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.158
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061