And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.229
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.369
And
I accept adding "cowsay" to Additional Software
3.803
And
Additional Software is correctly configured for package "cowsay"
0.723
And
I shutdown Tails and wait for the computer to power off
4.156
And
I start Tails from USB drive "__internal" with network unplugged
36.610
And
I enable persistence
5.190
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.353
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.369
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.012
And
available upgrades have been checked
2.181
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.532
And
I can open the Additional Software configuration window from the notification
2.629
And
I shutdown Tails and wait for the computer to power off
22.428
And
I start Tails from USB drive "__internal" with network unplugged
36.854
And
I enable persistence
5.727
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
10.222
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.301
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061