And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:29.129
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.334
And
I accept adding "cowsay" to Additional Software
5.516
And
Additional Software is correctly configured for package "cowsay"
0.762
And
I shutdown Tails and wait for the computer to power off
7.647
And
I start Tails from USB drive "__internal" with network unplugged
42.263
And
I enable persistence
8.196
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
12.003
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.332
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.100
And
the network is plugged
0.066
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.297
And
I can open the Additional Software configuration window from the notification
2.759
And
I shutdown Tails and wait for the computer to power off
18.521
And
I start Tails from USB drive "__internal" with network unplugged
42.145
And
I enable persistence
8.064
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
11.935
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.347
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.141
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067