And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.609
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.159
And
I accept adding "cowsay" to Additional Software
3.694
And
Additional Software is correctly configured for package "cowsay"
0.769
And
I shutdown Tails and wait for the computer to power off
4.058
And
I start Tails from USB drive "__internal" with network unplugged
36.767
And
I enable persistence
6.929
And
I configure APT to prefer an old version of cowsay
0.018
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
9.381
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.412
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.016
And
available upgrades have been checked
2.220
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.560
And
I can open the Additional Software configuration window from the notification
2.548
And
I shutdown Tails and wait for the computer to power off
17.439
And
I start Tails from USB drive "__internal" with network unplugged
37.052
And
I enable persistence
6.477
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
10.028
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.581
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.113
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073