And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.153
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.445
And
I accept adding "cowsay" to Additional Software
3.697
And
Additional Software is correctly configured for package "cowsay"
0.554
And
I shutdown Tails and wait for the computer to power off
7.899
And
I start Tails from USB drive "__internal" with network unplugged
34.397
And
I enable persistence
5.356
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
9.690
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.342
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.015
And
available upgrades have been checked
1.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.484
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
22.168
And
I start Tails from USB drive "__internal" with network unplugged
34.657
And
I enable persistence
5.418
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.663
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.335
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.132
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050