And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:31.347
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.325
And
I accept adding "cowsay" to Additional Software
5.647
And
Additional Software is correctly configured for package "cowsay"
0.812
And
I shutdown Tails and wait for the computer to power off
4.832
And
I start Tails from USB drive "__internal" with network unplugged
42.320
And
I enable persistence
7.626
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
15.231
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.378
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
3.658
And
available upgrades have been checked
0.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.507
And
I can open the Additional Software configuration window from the notification
3.081
And
I shutdown Tails and wait for the computer to power off
2:3.178
And
I start Tails from USB drive "__internal" with network unplugged
42.437
And
I enable persistence
8.805
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
12.707
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.909
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.079
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.147
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091