And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.555
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.955
And
I accept adding "cowsay" to Additional Software
3.678
And
Additional Software is correctly configured for package "cowsay"
0.617
And
I shutdown Tails and wait for the computer to power off
8.216
And
I start Tails from USB drive "__internal" with network unplugged
36.999
And
I enable persistence
6.763
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
10.411
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.616
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.013
And
available upgrades have been checked
1.109
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.004
And
I can open the Additional Software configuration window from the notification
2.612
And
I shutdown Tails and wait for the computer to power off
13.524
And
I start Tails from USB drive "__internal" with network unplugged
36.495
And
I enable persistence
7.420
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.213
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.273
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.145
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061