And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.718
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.286
And
I accept adding "cowsay" to Additional Software
3.672
And
Additional Software is correctly configured for package "cowsay"
0.538
And
I shutdown Tails and wait for the computer to power off
7.811
And
I start Tails from USB drive "__internal" with network unplugged
34.757
And
I enable persistence
5.256
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
9.279
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.410
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.012
And
available upgrades have been checked
1.076
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.529
And
I can open the Additional Software configuration window from the notification
2.479
And
I shutdown Tails and wait for the computer to power off
13.394
And
I start Tails from USB drive "__internal" with network unplugged
35.138
And
I enable persistence
5.452
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.344
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.316
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.143
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053