And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.839
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.901
And
I accept adding "cowsay" to Additional Software
5.612
And
Additional Software is correctly configured for package "cowsay"
0.697
And
I shutdown Tails and wait for the computer to power off
7.414
And
I start Tails from USB drive "__internal" with network unplugged
40.728
And
I enable persistence
7.289
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
12.218
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.547
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.083
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.676
And
I can open the Additional Software configuration window from the notification
2.723
And
I shutdown Tails and wait for the computer to power off
2:7.414
And
I start Tails from USB drive "__internal" with network unplugged
39.670
And
I enable persistence
7.344
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
11.559
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.674
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.052
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069