And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.575
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.756
And
I accept adding "cowsay" to Additional Software
4.916
And
Additional Software is correctly configured for package "cowsay"
0.620
And
I shutdown Tails and wait for the computer to power off
7.941
And
I start Tails from USB drive "__internal" with network unplugged
36.358
And
I enable persistence
6.219
And
I configure APT to prefer an old version of cowsay
0.045
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
10.154
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.762
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.032
And
available upgrades have been checked
2.195
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.561
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
17.725
And
I start Tails from USB drive "__internal" with network unplugged
35.747
And
I enable persistence
6.370
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
12.003
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.415
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.203
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075