And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:39.101
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.022
And
I accept adding "cowsay" to Additional Software
6.914
And
Additional Software is correctly configured for package "cowsay"
0.751
And
I shutdown Tails and wait for the computer to power off
8.201
And
I start Tails from USB drive "__internal" with network unplugged
44.623
And
I enable persistence
7.642
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
14.990
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.369
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.059
And
available upgrades have been checked
0.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.557
And
I can open the Additional Software configuration window from the notification
2.895
And
I shutdown Tails and wait for the computer to power off
23.574
And
I start Tails from USB drive "__internal" with network unplugged
45.129
And
I enable persistence
10.106
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
13.727
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.498
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.055
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091