And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.191
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.517
And
I accept adding "cowsay" to Additional Software
5.005
And
Additional Software is correctly configured for package "cowsay"
1.069
And
I shutdown Tails and wait for the computer to power off
8.138
And
I start Tails from USB drive "__internal" with network unplugged
36.721
And
I enable persistence
6.728
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
9.946
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.382
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.015
And
available upgrades have been checked
0.094
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.549
And
I can open the Additional Software configuration window from the notification
2.564
And
I shutdown Tails and wait for the computer to power off
13.344
And
I start Tails from USB drive "__internal" with network unplugged
37.671
And
I enable persistence
6.842
And
I configure APT to prefer an old version of cowsay
0.016
And
I log in to a new session
10.660
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.369
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065