And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.941
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.419
And
I accept adding "cowsay" to Additional Software
6.285
And
Additional Software is correctly configured for package "cowsay"
0.672
And
I shutdown Tails and wait for the computer to power off
8.393
And
I start Tails from USB drive "__internal" with network unplugged
37.950
And
I enable persistence
7.341
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
10.485
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.353
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.014
And
available upgrades have been checked
1.186
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.577
And
I can open the Additional Software configuration window from the notification
2.601
And
I shutdown Tails and wait for the computer to power off
12.458
And
I start Tails from USB drive "__internal" with network unplugged
38.348
And
I enable persistence
7.218
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
12.323
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.411
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057