And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:50.996
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.582
And
I accept adding "cowsay" to Additional Software
5.063
And
Additional Software is correctly configured for package "cowsay"
0.825
And
I shutdown Tails and wait for the computer to power off
6.948
And
I start Tails from USB drive "__internal" with network unplugged
37.577
And
I enable persistence
6.429
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
12.095
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.298
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.023
And
available upgrades have been checked
1.094
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.069
And
I can open the Additional Software configuration window from the notification
2.642
And
I shutdown Tails and wait for the computer to power off
18.300
And
I start Tails from USB drive "__internal" with network unplugged
37.893
And
I enable persistence
7.125
And
I configure APT to prefer an old version of cowsay
0.039
And
I log in to a new session
10.371
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.365
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067