And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.282
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.949
And
I accept adding "cowsay" to Additional Software
5.109
And
Additional Software is correctly configured for package "cowsay"
0.645
And
I shutdown Tails and wait for the computer to power off
4.033
And
I start Tails from USB drive "__internal" with network unplugged
34.988
And
I enable persistence
6.296
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.570
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.367
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.015
And
available upgrades have been checked
1.151
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.547
And
I can open the Additional Software configuration window from the notification
2.536
And
I shutdown Tails and wait for the computer to power off
13.608
And
I start Tails from USB drive "__internal" with network unplugged
36.392
And
I enable persistence
6.502
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.092
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.340
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.189
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068