And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.583
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.077
And
I accept adding "cowsay" to Additional Software
3.701
And
Additional Software is correctly configured for package "cowsay"
0.577
And
I shutdown Tails and wait for the computer to power off
7.796
And
I start Tails from USB drive "__internal" with network unplugged
35.757
And
I enable persistence
5.463
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.115
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.281
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.042
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.435
And
I can open the Additional Software configuration window from the notification
2.639
And
I shutdown Tails and wait for the computer to power off
13.200
And
I start Tails from USB drive "__internal" with network unplugged
34.274
And
I enable persistence
5.479
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.232
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.325
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.102
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059