And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.423
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.737
And
I accept adding "cowsay" to Additional Software
6.213
And
Additional Software is correctly configured for package "cowsay"
0.708
And
I shutdown Tails and wait for the computer to power off
8.844
And
I start Tails from USB drive "__internal" with network unplugged
38.043
And
I enable persistence
6.942
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.558
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.352
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.016
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.526
And
I can open the Additional Software configuration window from the notification
2.818
And
I shutdown Tails and wait for the computer to power off
22.293
And
I start Tails from USB drive "__internal" with network unplugged
39.100
And
I enable persistence
7.279
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.403
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.416
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.120
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059