And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.208
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.665
And
I accept adding "cowsay" to Additional Software
3.612
And
Additional Software is correctly configured for package "cowsay"
0.607
And
I shutdown Tails and wait for the computer to power off
7.957
And
I start Tails from USB drive "__internal" with network unplugged
35.499
And
I enable persistence
6.430
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
9.747
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.268
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.013
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.423
And
I can open the Additional Software configuration window from the notification
2.522
And
I shutdown Tails and wait for the computer to power off
22.261
And
I start Tails from USB drive "__internal" with network unplugged
34.576
And
I enable persistence
5.448
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.405
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.349
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.140
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049