And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:31.988
And
I configure APT to prefer an old version of cowsay
0.041
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.702
And
I accept adding "cowsay" to Additional Software
5.358
And
Additional Software is correctly configured for package "cowsay"
0.981
And
I shutdown Tails and wait for the computer to power off
8.001
And
I start Tails from USB drive "__internal" with network unplugged
42.790
And
I enable persistence
7.796
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
14.030
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.560
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.053
And
available upgrades have been checked
0.075
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.730
And
I can open the Additional Software configuration window from the notification
2.909
And
I shutdown Tails and wait for the computer to power off
18.753
And
I start Tails from USB drive "__internal" with network unplugged
41.330
And
I enable persistence
7.817
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.974
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.346
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.217
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108