And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.459
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.323
And
I accept adding "cowsay" to Additional Software
6.269
And
Additional Software is correctly configured for package "cowsay"
0.666
And
I shutdown Tails and wait for the computer to power off
7.456
And
I start Tails from USB drive "__internal" with network unplugged
39.752
And
I enable persistence
8.441
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
12.306
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.394
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.018
And
available upgrades have been checked
2.335
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.999
And
I can open the Additional Software configuration window from the notification
2.614
And
I shutdown Tails and wait for the computer to power off
18.727
And
I start Tails from USB drive "__internal" with network unplugged
39.904
And
I enable persistence
6.779
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
13.079
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.432
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.100
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.122
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091