And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.027
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.655
And
I accept adding "cowsay" to Additional Software
3.803
And
Additional Software is correctly configured for package "cowsay"
0.791
And
I shutdown Tails and wait for the computer to power off
4.056
And
I start Tails from USB drive "__internal" with network unplugged
36.245
And
I enable persistence
5.798
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
10.353
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.396
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.020
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.057
And
I can open the Additional Software configuration window from the notification
2.634
And
I shutdown Tails and wait for the computer to power off
22.791
And
I start Tails from USB drive "__internal" with network unplugged
35.884
And
I enable persistence
6.221
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.733
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.482
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.138
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065