And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:46.069
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.093
And
I accept adding "cowsay" to Additional Software
5.078
And
Additional Software is correctly configured for package "cowsay"
0.743
And
I shutdown Tails and wait for the computer to power off
8.224
And
I start Tails from USB drive "__internal" with network unplugged
36.505
And
I enable persistence
7.306
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
9.855
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.449
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.017
And
available upgrades have been checked
2.192
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.695
And
I can open the Additional Software configuration window from the notification
2.582
And
I shutdown Tails and wait for the computer to power off
17.607
And
I start Tails from USB drive "__internal" with network unplugged
38.130
And
I enable persistence
6.935
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.352
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.431
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065