And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:29.337
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.954
And
I accept adding "cowsay" to Additional Software
3.951
And
Additional Software is correctly configured for package "cowsay"
0.738
And
I shutdown Tails and wait for the computer to power off
7.461
And
I start Tails from USB drive "__internal" with network unplugged
42.123
And
I enable persistence
7.465
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
12.368
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.372
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.057
And
available upgrades have been checked
1.132
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.715
And
I can open the Additional Software configuration window from the notification
3.031
And
I shutdown Tails and wait for the computer to power off
17.991
And
I start Tails from USB drive "__internal" with network unplugged
42.433
And
I enable persistence
8.589
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
13.130
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.328
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.056
Then
the Additional Software upgrade service has started
0.220
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094