And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:30.222
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.199
And
I accept adding "cowsay" to Additional Software
5.741
And
Additional Software is correctly configured for package "cowsay"
0.776
And
I shutdown Tails and wait for the computer to power off
7.600
And
I start Tails from USB drive "__internal" with network unplugged
41.375
And
I enable persistence
7.894
And
I configure APT to prefer an old version of cowsay
0.045
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
11.441
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.404
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.059
And
available upgrades have been checked
0.064
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.931
And
I can open the Additional Software configuration window from the notification
2.733
And
I shutdown Tails and wait for the computer to power off
18.198
And
I start Tails from USB drive "__internal" with network unplugged
40.542
And
I enable persistence
8.028
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.460
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.403
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.163
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072