And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.427
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.217
And
I accept adding "cowsay" to Additional Software
3.680
And
Additional Software is correctly configured for package "cowsay"
0.571
And
I shutdown Tails and wait for the computer to power off
7.834
And
I start Tails from USB drive "__internal" with network unplugged
34.836
And
I enable persistence
5.476
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
8.467
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.351
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.019
And
available upgrades have been checked
2.143
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.446
And
I can open the Additional Software configuration window from the notification
2.530
And
I shutdown Tails and wait for the computer to power off
18.469
And
I start Tails from USB drive "__internal" with network unplugged
33.853
And
I enable persistence
6.191
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.859
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.620
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.153
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070