And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.878
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.439
And
I accept adding "cowsay" to Additional Software
3.636
And
Additional Software is correctly configured for package "cowsay"
0.571
And
I shutdown Tails and wait for the computer to power off
7.878
And
I start Tails from USB drive "__internal" with network unplugged
34.737
And
I enable persistence
5.365
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
9.282
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.352
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.017
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.382
And
I can open the Additional Software configuration window from the notification
2.500
And
I shutdown Tails and wait for the computer to power off
22.126
And
I start Tails from USB drive "__internal" with network unplugged
34.424
And
I enable persistence
6.631
And
I configure APT to prefer an old version of cowsay
0.016
And
I log in to a new session
9.620
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.259
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.128
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058