And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:36.112
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
10.525
And
I accept adding "cowsay" to Additional Software
5.550
And
Additional Software is correctly configured for package "cowsay"
0.805
And
I shutdown Tails and wait for the computer to power off
9.041
And
I start Tails from USB drive "__internal" with network unplugged
45.445
And
I enable persistence
7.866
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.105
And
I log in to a new session
14.115
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.422
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.173
And
I prepare the Additional Software upgrade process to fail
0.105
And
the network is plugged
0.077
And
available upgrades have been checked
0.042
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.383
And
I can open the Additional Software configuration window from the notification
3.199
And
I shutdown Tails and wait for the computer to power off
18.903
And
I start Tails from USB drive "__internal" with network unplugged
46.014
And
I enable persistence
8.802
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
14.205
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.365
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.088
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.167
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074