And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:35.579
And
I configure APT to prefer an old version of cowsay
0.039
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.967
And
I accept adding "cowsay" to Additional Software
5.308
And
Additional Software is correctly configured for package "cowsay"
0.730
And
I shutdown Tails and wait for the computer to power off
8.020
And
I start Tails from USB drive "__internal" with network unplugged
40.909
And
I enable persistence
7.587
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
12.121
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.431
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.048
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.227
And
I can open the Additional Software configuration window from the notification
2.714
And
I shutdown Tails and wait for the computer to power off
18.133
And
I start Tails from USB drive "__internal" with network unplugged
41.691
And
I enable persistence
7.816
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
12.358
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.311
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.088
Then
the Additional Software upgrade service has started
0.167
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082