And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.384
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.460
And
I accept adding "cowsay" to Additional Software
3.789
And
Additional Software is correctly configured for package "cowsay"
0.551
And
I shutdown Tails and wait for the computer to power off
2.633
And
I start Tails from USB drive "__internal" with network unplugged
34.388
And
I enable persistence
5.464
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
8.796
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.336
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.014
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.557
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
18.327
And
I start Tails from USB drive "__internal" with network unplugged
34.064
And
I enable persistence
5.679
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.482
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.345
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.120
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054