And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:40.422
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.851
And
I accept adding "cowsay" to Additional Software
6.509
And
Additional Software is correctly configured for package "cowsay"
0.869
And
I shutdown Tails and wait for the computer to power off
4.872
And
I start Tails from USB drive "__internal" with network unplugged
44.256
And
I enable persistence
10.680
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
15.303
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.421
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.055
And
available upgrades have been checked
0.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.524
And
I can open the Additional Software configuration window from the notification
2.629
And
I shutdown Tails and wait for the computer to power off
23.072
And
I start Tails from USB drive "__internal" with network unplugged
46.958
And
I enable persistence
9.251
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
13.434
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.834
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.054
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083