And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.899
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.315
And
I accept adding "cowsay" to Additional Software
5.492
And
Additional Software is correctly configured for package "cowsay"
0.734
And
I shutdown Tails and wait for the computer to power off
7.872
And
I start Tails from USB drive "__internal" with network unplugged
42.182
And
I enable persistence
9.922
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.844
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.796
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.060
And
available upgrades have been checked
0.069
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.380
And
I can open the Additional Software configuration window from the notification
2.804
And
I shutdown Tails and wait for the computer to power off
18.328
And
I start Tails from USB drive "__internal" with network unplugged
41.932
And
I enable persistence
7.892
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
12.050
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.331
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076