And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.621
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.141
And
I accept adding "cowsay" to Additional Software
4.005
And
Additional Software is correctly configured for package "cowsay"
0.681
And
I shutdown Tails and wait for the computer to power off
7.360
And
I start Tails from USB drive "__internal" with network unplugged
40.142
And
I enable persistence
7.436
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
10.265
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.356
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.051
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.672
And
I can open the Additional Software configuration window from the notification
2.687
And
I shutdown Tails and wait for the computer to power off
2:2.568
And
I start Tails from USB drive "__internal" with network unplugged
40.243
And
I enable persistence
7.521
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
11.973
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.321
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.050
Then
the Additional Software upgrade service has started
0.148
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077