And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:55.551
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.793
And
I accept adding "cowsay" to Additional Software
4.122
And
Additional Software is correctly configured for package "cowsay"
0.643
And
I shutdown Tails and wait for the computer to power off
7.429
And
I start Tails from USB drive "__internal" with network unplugged
40.076
And
I enable persistence
7.448
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
11.865
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.298
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.055
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.247
And
I can open the Additional Software configuration window from the notification
2.754
And
I shutdown Tails and wait for the computer to power off
2:2.366
And
I start Tails from USB drive "__internal" with network unplugged
39.632
And
I enable persistence
7.396
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
11.982
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.313
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.055
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067