And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.068
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.301
And
I accept adding "cowsay" to Additional Software
4.099
And
Additional Software is correctly configured for package "cowsay"
0.696
And
I shutdown Tails and wait for the computer to power off
3.043
And
I start Tails from USB drive "__internal" with network unplugged
40.239
And
I enable persistence
7.146
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
12.357
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.341
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.054
And
available upgrades have been checked
1.135
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.091
And
I can open the Additional Software configuration window from the notification
3.148
And
I shutdown Tails and wait for the computer to power off
17.794
And
I start Tails from USB drive "__internal" with network unplugged
40.414
And
I enable persistence
7.784
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.047
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.694
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074