And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:37.239
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.106
And
I accept adding "cowsay" to Additional Software
6.859
And
Additional Software is correctly configured for package "cowsay"
1.036
And
I shutdown Tails and wait for the computer to power off
7.668
And
I start Tails from USB drive "__internal" with network unplugged
45.240
And
I enable persistence
10.379
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
14.488
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.369
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.074
And
available upgrades have been checked
0.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.950
And
I can open the Additional Software configuration window from the notification
2.908
And
I shutdown Tails and wait for the computer to power off
2:2.451
And
I start Tails from USB drive "__internal" with network unplugged
41.897
And
I enable persistence
7.237
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.222
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.377
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.088
Then
the Additional Software upgrade service has started
0.213
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077