And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.305
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.068
And
I accept adding "cowsay" to Additional Software
4.083
And
Additional Software is correctly configured for package "cowsay"
0.684
And
I shutdown Tails and wait for the computer to power off
7.391
And
I start Tails from USB drive "__internal" with network unplugged
40.691
And
I enable persistence
7.481
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
10.725
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.351
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.057
And
available upgrades have been checked
1.133
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.670
And
I can open the Additional Software configuration window from the notification
3.282
And
I shutdown Tails and wait for the computer to power off
22.197
And
I start Tails from USB drive "__internal" with network unplugged
40.516
And
I enable persistence
7.261
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
11.994
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.363
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.136
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073