And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.916
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.094
And
I accept adding "cowsay" to Additional Software
3.897
And
Additional Software is correctly configured for package "cowsay"
0.585
And
I shutdown Tails and wait for the computer to power off
7.866
And
I start Tails from USB drive "__internal" with network unplugged
34.595
And
I enable persistence
5.293
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.121
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.640
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.036
And
the network is plugged
0.017
And
available upgrades have been checked
1.141
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.971
And
I can open the Additional Software configuration window from the notification
2.568
And
I shutdown Tails and wait for the computer to power off
13.114
And
I start Tails from USB drive "__internal" with network unplugged
34.541
And
I enable persistence
5.479
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
9.762
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.316
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.121
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057