And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.966
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.620
And
I accept adding "cowsay" to Additional Software
5.183
And
Additional Software is correctly configured for package "cowsay"
0.767
And
I shutdown Tails and wait for the computer to power off
7.874
And
I start Tails from USB drive "__internal" with network unplugged
41.381
And
I enable persistence
8.464
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
12.722
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.350
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.055
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.863
And
I can open the Additional Software configuration window from the notification
2.726
And
I shutdown Tails and wait for the computer to power off
22.783
And
I start Tails from USB drive "__internal" with network unplugged
43.748
And
I enable persistence
9.128
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.112
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.774
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.049
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075