And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.015
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.484
And
I accept adding "cowsay" to Additional Software
3.976
And
Additional Software is correctly configured for package "cowsay"
0.644
And
I shutdown Tails and wait for the computer to power off
7.385
And
I start Tails from USB drive "__internal" with network unplugged
40.464
And
I enable persistence
7.338
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.690
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.404
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.064
And
available upgrades have been checked
0.040
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.968
And
I can open the Additional Software configuration window from the notification
2.763
And
I shutdown Tails and wait for the computer to power off
17.805
And
I start Tails from USB drive "__internal" with network unplugged
39.844
And
I enable persistence
7.472
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
10.803
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.383
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.054
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061