And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:29.143
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.894
And
I accept adding "cowsay" to Additional Software
5.822
And
Additional Software is correctly configured for package "cowsay"
0.768
And
I shutdown Tails and wait for the computer to power off
7.504
And
I start Tails from USB drive "__internal" with network unplugged
40.646
And
I enable persistence
8.898
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
12.559
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.465
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.059
And
available upgrades have been checked
0.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.751
And
I can open the Additional Software configuration window from the notification
3.035
And
I shutdown Tails and wait for the computer to power off
18.292
And
I start Tails from USB drive "__internal" with network unplugged
41.091
And
I enable persistence
7.416
And
I configure APT to prefer an old version of cowsay
0.046
And
I log in to a new session
12.254
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.463
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068