And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.633
And
I configure APT to prefer an old version of cowsay
0.019
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.839
And
I accept adding "cowsay" to Additional Software
3.933
And
Additional Software is correctly configured for package "cowsay"
0.660
And
I shutdown Tails and wait for the computer to power off
7.384
And
I start Tails from USB drive "__internal" with network unplugged
40.136
And
I enable persistence
7.473
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
10.242
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.772
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.059
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.921
And
I can open the Additional Software configuration window from the notification
2.739
And
I shutdown Tails and wait for the computer to power off
17.849
And
I start Tails from USB drive "__internal" with network unplugged
40.755
And
I enable persistence
7.333
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
10.595
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.376
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.046
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067