And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.222
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.192
And
I accept adding "cowsay" to Additional Software
3.816
And
Additional Software is correctly configured for package "cowsay"
0.595
And
I shutdown Tails and wait for the computer to power off
7.961
And
I start Tails from USB drive "__internal" with network unplugged
35.664
And
I enable persistence
6.369
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.099
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.267
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.016
And
available upgrades have been checked
0.037
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.528
And
I can open the Additional Software configuration window from the notification
2.513
And
I shutdown Tails and wait for the computer to power off
17.032
And
I start Tails from USB drive "__internal" with network unplugged
34.258
And
I enable persistence
5.329
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.803
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.279
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.119
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069